E+E高精度微差壓計EE610
Highly Accurate Low Differential Pressure Sensor
E+E差壓變送器是專為暖通空調、自動化樓宇、潔凈室和醫院行業而研發的產品，是通風控制、空調系統、過濾器和潔凈室監測應用中測量差壓的理想選擇。該系列產品不僅可以測量空氣，同時也適用于非易燃和非腐蝕性氣體的測量。產品使用了壓敏電阻式敏感元件，即使在測量微小的差壓時也可保持卓越的長期穩定性。
With the EE610, E+E Elektronik offers a new sensor for low differential pressure up to ±100 Pa with an accuracy of ±0.5 Pa. Due to selectable measuring ranges and versatile configuration options, the EE610 is suitable for a variety of applications in air as well as in non-flammable and non-aggressive gases.
The EE610 is dedicated for medical, pharmaceutical and clean room applications. For instance, the sensor can measure the differential pressure between clean rooms, surgery rooms or isolation chambers. The non-flow through design excludes cross-contamination.
Selectable Measuring Ranges量程范圍與精度
The EE610 enables unidirectional or bidirectional differential pressure measurement within a selectable measuring range of 0...100 Pa or ±25, ±50 and ±100 Pa. The long-term stable, piezo-resistive pressure sensing element provides a high accuracy of ±0.5 Pa
Analogue Output and Display輸出信號與顯示
The measured data is simultaneously available as current and voltage signals at the spring loaded terminals. The illuminated graphic display shows the reading in Pa, mbar, inch water column or mm H2O.
Fully Configurable 可以自由設定
The EE610 can be easily configured on site. Pressure range, time constant, output signal, display units and backlight can be set via DIP switches on the electronics board. The zero and span point adjustment can be performed with push buttons.
Easy Mounting 易于安裝
The functional IP65 / NEMA 4 enclosure facilitates mounting the sensor with closed cover. This saves time and also protects the electronics from construction site pollution and mechanical damage during installation. For wiring the EE610 features both a cable gland and a knockout opening for a ½”conduit adapter.